![]() |
Products "A Full Range Of Products" |
|
Home | Licensing | Color Chart | Products | Stucco Application | Contact Us | Other Links |
|
| "For All Your Cement And Synthetic Stucco Needs..." | |
![]() |
Conventional Portland Cement Stucco: Most time proven of all wall coverings. Comes to you containing all the necessary ingredients ready for use with the addition of clean water. It is factory blended in 94 lb. bags, available in 25 colors and will cover 50 square feet. |
![]() |
TextureFlex Acrylic Stucco: Pre-blended elastomeric acrylic polymer coating finish packaged in 60 lb. pails covering approximately 125+ square feet and in a wide variety of colors. |
![]() |
RollFlex: Top of the line roll on acrylic polymer coating, available in a wide variety of integral colors. Five gallons covers approximately 325 square feet and dries to a approximately 10.3 mils. Excellent for sealing in cracks as well as reviving aged stucco. |
![]() |
Elastocote: An excellent masonry coating that may be applied by brush, roller, or airless sprayer. It comes in one and five gallon pails in a wide range of colors and will cover approximately 500 square feet per 5 gallons. It may be used over cement stucco, detail work, accent bands, as well as reviving aged stucco. |
![]() |
Texflex Cement Bonder: An excellent pre-blended acrylic bonder to be used when Texture-Flex is installed over Monolithic Cement, Cement Brown Coat, or E-Z Wall base, to assure a positive bond. Comes in 1 and 5 gallon containers. Coverage :150 to 200 sq. ft. per gallon, pending porosity. |
![]() |
Magna E-Z Wall Base Coat: Pre-mixed glass fiber reinforced portland base coat, factory blended in 90 lb. bags covering 25 square feet at 3/8" thickness. Finish with the following California Stucco Products: Conventional cement stucco, TextureFlex or Elastocote. |
![]() |
Magna E-Z Wall Concentrate: Pre-blended cement base coat containing nylon fibers and proprietary modifiers. Add 18 shovels of sand per 70 lb. bag of Magna / E-Z Wall Concentrate, covers 60 square feet at 1/2" thickness. |
![]() |
Mesh Coat: High percent acrylic-portland base product which can be used as a foam adhesive and to embed fiber glass mesh to cover foam board and detail work. Packaged in 80 lb. bags covering approximately 140 square. Just add water. |